Titan GatesCall 0499 280 634

Looking after aluminium gates and fences near the coast

Aluminium is the material of choice for gates and fencing on the Gold Coast because it does not rust. That does not mean it needs no care at all. Salt carried on the sea breeze settles on everything, and over time it can mark the powder coat and stiffen hinges and latches.

Rinse it regularly

The simplest habit is the most effective: hose your gates and fencing down with fresh water. Use a soft brush or cloth and mild soapy water if there is a build-up, then rinse it off. Avoid abrasive pads and strong solvents, which can damage the finish.

How often depends on how close you are to salt water. Homes right on the Broadwater or the beachfront benefit from more frequent rinsing than homes further inland. Powder coat manufacturers publish their own cleaning intervals for coastal areas, and following them is part of keeping a coating warranty valid.

Watch the sheltered spots

Surprisingly, the parts of a fence that stay dry are often the first to show marks. Rain rinses exposed surfaces naturally, while sections under eaves, behind garden beds or inside carports never get washed. Salt sits there and builds up. Give those areas extra attention.

Check the moving parts

A few times a year:

  • open and close each gate and listen for grinding or squeaks
  • check hinges and latches for stiffness, and that the gate closes square
  • on sliding gates, clear leaves and sand from the track
  • on pool gates, open the gate to a few positions and let go. It must close and latch on its own every time.

Automatic gates

If your gate is automated, keep the area around the motor clear of plants and mulch, and keep the safety beams clean so they see properly. Test that the gate stops or reverses when it meets an obstacle. If anything feels wrong, stop using the automation and get it checked.

Scratches and chips

Small chips in powder coat can be touched up. Clean the area first so salt is not sealed in underneath. Larger damage may need the panel recoated.

When to call us

If a gate has dropped, a latch no longer catches, or a sliding gate jumps its track, get in touch. Small problems are much easier to fix early. Contact Titan Gates.

Request a QuoteCall 0499 280 634

Ready to plan your new gate?

Tell us about your project to request a free quote.

Request a QuoteCall 0499 280 634